Cyclo Dust Filter
Home » Products » Cyclo Dust Filter
Cyclo Dust Filter
“Is the Cyclo Filter right for you?”
The Dustraction Cyclo Filter combines the technologies of a cyclone with those of a reverse-pulse filter in a single, robust unit.
As dirty air enters, it is forced into a swirling motion that cyclonically separates up to 95% of the waste before it ever reaches the filter media, the remaining fine particulate is captured on the outside of the filter tubes and cleared automatically by reverse-pulse jets of compressed air.
The result is exceptionally low emissions, long filter life and continuous 24-hour operation. Fabricated from 3mm steel plate, the Cyclo Filter is built to last a virtual working lifetime and is typically specified for medium to large wood waste, MDF and grain extraction systems.
The cyclo filter has virtually no moving parts and hence requires minimal maintenance.
Select a variant:
- Ground-standing — minimal headroom required, ideal for retrofit into existing buildings
- Waste collected directly into bins, bags or sacks beneath the unit
- Lower installed height and cost than the structure-mounted option
- Best for low-to-medium waste volumes and intermittent disposal
- Same 3mm plate construction, reverse-pulse cleaning and emission performance as the conical unit
- Mounted on a steel support structure for elevated, continuous discharge
- Conical hopper with rotary valve - feeds skips, containers, silos or briquetters
- Allows pneumatic conveying of collected waste to remote storage
- Access platform and ladder options for safe maintenance at height

70 years UK engineering
Est. 1955
UK manufactured
& factory tested
COSHH / LEV / ATEX
compliant by design
EMDA Member
industry association
Running after 50 years
proven longevity
Overview
Is the Cyclo right for you?
| Industries | Woodworking & joinery, MDF and panel-product manufacturing, sawmills, furniture, architectural mouldings, grain and agricultural handling. |
| Materials | Wood chip and shavings, MDF and board dust, sander dust, grain and other medium-to-heavy dry particulates. |
| System size | Medium to large extraction systems with high, sustained air volumes. |
| Duty cycle | Continuous, 24/7 operation with automatic self-cleaning. |
| Typical outcome | Waste recovered for briquetting, biomass or silo storage; clean air returned or exhausted to legislation limits. |
How it Works
Key Features & Benefits
Product Anatomy
Select a variant:


Product Specifications
| Cyclo Filter Size | Maximum airflow m3/h | Plan Dim "A" (mm) | Height Dim "B" (mm) | Sleeves DX2000 |
|---|---|---|---|---|
| 2 | 12500 | 2150 | 5010 | |
| 3 | 18500 | 2320 | 5850 | |
| 4 | 25000 | 2510 | 6750 | |
| 5 | 37500 | 3000 | 6750 | 80 |
| 6 | 50000 | 3460 | 7250 | 110 |
| 7 | 70000 | 4130 | 7850 | 152 |
| 8 | 94000 | 4730 | 7950 | |
| 9 | 124000 | 5350 | 7950 | |
| 10 | 160000 | 6000 | 8570 | 364 |
Select a variant:
| Specification | Value |
|---|---|
Configuration | Flat Bottom, Ground-Standing |
Airflow range (m3/hour) | 12,500 m³/h and 160,000 m³/h (See Table) |
Number of models / sizes | DXC2 to DXC10 |
Number of filter sleeves | Up to 364 Filter Sleeves |
Overall dimensions (W × D × H) | See Table Above |
Compressed air requirement | Minimum 90 p.s.i.g. |
Fan Location | Dirty Side Fan |
Waste discharge | Manual Slide Valve, or Rotary Valve into Bin or Baulker Bags.. |
Filtration efficiency | 95% Cyclonic Pre-separation; Overall to 0.2 mg/m³ Emission |
Construction | 3 mm Mild Steel Plate. |
| Feature | StandardStd | OptionalOpt |
|---|---|---|
Cyclonic pre-separation chamber Removes ~95% of waste before the filter media | ✓ | |
Reverse-pulse (jet) cleaning Automatic, pressure-triggered compressed-air cleaning | ✓ | |
3 mm steel plate construction Built for a virtual working lifetime | ✓ | |
Filter bag guarantee 6,000 hours / 3 years | ✓ | |
Emission guarantee 0.2 mg/m³ | ✓ | |
Differential pressure gauge / control Triggers cleaning at preset pressure drop | ✓ | |
Weatherproofing / external finish For outdoor installation | ✓ | |
ATEX explosion protection Explosion relief panels | ✓ | |
Fan and starter package Matched fan, silencer and control panel | ✓ | |
Central Control Panel | ✓ | |
Emission guarantee 0.2 mg/m³ | ✓ | |
Stainless Steel Construction | ✓ | |
Maintenance access platform & ladder Safe working access at height | ✓ | |
Energy Save Control Panel | ✓ |
| Specification | Value |
|---|---|
Configuration | Conical hopper on steel support structure |
Airflow range | 12,500 m³/h and 160,000 m³/h (See table) |
Number of models / sizes | DXC2 to DXC10 |
Number of filter sleeves | Up to 364 Filter Sleeves |
Overall dimensions (W × D × H) | See table above |
Compressed air requirement | Minimum 90 p.s.i.g. |
Discharge height under valve | Made to Client Requirements |
Fan location | Clean Side Fan |
Waste discharge | Rotary valve - Continuous, to Container or Pneumatic Conveying. Skip or Baulker Bags. |
Filtration efficiency | 95% Cyclonic Pre-separation; Overall to 0.2 mg/m³ Emission |
Construction | 3 mm Mild Steel Plate. Structural Steel Support Frame. |
| Feature | StandardStd | OptionalOpt |
|---|---|---|
Cyclonic pre-separation chamber Removes ~95% of waste before the filter media | ✓ | |
Reverse-pulse (jet) cleaning Automatic, pressure-triggered compressed-air cleaning | ✓ | |
Steel support structure Elevated for continuous under-unit discharge | ✓ | |
Conical hopper + rotary valve Continuous, controlled waste discharge | ✓ | |
3 mm steel plate construction Built for a virtual working lifetime | ✓ | |
Filter bag guarantee 6,000 hours / 3 years | ✓ | |
Emission guarantee 0.2 mg/m³ | ✓ | |
Weatherproofing / external finish For outdoor installation | ✓ | |
ATEX explosion protection Explosion relief panels | ✓ | |
Maintenance access platform & ladder Safe working access at height | ✓ | |
Pneumatic conveying to silo Transfer waste to remote storage / briquetter | ✓ | |
Fan and starter package Matched fan, silencer and control panel | ✓ | |
Stainless Steel Construction | ✓ | |
Hopper Level Indicators Audible and Visual | ✓ | |
Raise Up for Skip or Bulker Bag | ✓ | |
Emergency Bagging System Used in Conjunction with a Conveying System | ✓ | |
Energy Save Control Panel | ✓ |
Total Cost of Ownership
Lower running costs over the whole life of the plant
The Cyclo Filter is designed to keep long-term operating costs down, not just the purchase price. Because cyclonic pre-separation removes most of the waste before it reaches the media, filters last longer and are protected from abrasive wear, reducing replacement frequency and spend.
Reverse-pulse cleaning keeps the pressure drop across the filter low and stable, which keeps the fan working efficiently and saves energy. Robust 3mm plate construction means decades of service life; Dustraction has supporting systems still running after 50 years. Recovered waste can be briquetted or used for biomass heating, turning a disposal cost into a saving.
Compliance & Safety
Compliant by design — and we'll prove it
COSHH, LEV and ATEX considered from the drawing board. Every unit is factory-tested before it leaves Leicester, and we provide ongoing LEV testing, servicing and spares.
Free dust extraction / LEV assessment
Not ready to buy? Book a no-obligation site assessment with one of our engineers.
Resources & Downloads
Case Study
Dustraction has been the wood-waste extraction supplier of choice at SAM Mouldings. Europe’s leading manufacturer of architectural mouldings in MDF for well over a decade, helping the plant win significant environmental-protection accolades. Most recently a new 80 m³ storage silo, the fourth on the eight-acre site, was installed to take and store MDF waste from an existing but relocated cyclo filter.
Ready to improve air quality in your workplace?
Tell us about your process and an engineer will respond — typically within one working day. No obligation.
- +44 (0) 116 2713 212
- info@dustraction.co.uk
"*" indicates required fields